[ previous ] [ Contents ]

Release Notes for Debian GNU/Linux 2.2 (`potato'), Motorola 680x0
Chapter 3 Upgrades from previous releases


3.1 Detailed changes to the system

The upgrade procedures described below can be used to upgrade any previous Debian release to 2.2 at once; you should not have to upgrade separately to every intermediate release. Note however, that upgrades from releases 2.0 and earlier to 2.2 have not been tested extensively, and are therefore not supported.

Backwards source and binary compatibility in GNU LibC 2.1 means most programs from the previous release will run on the new release (but not the other way around). All packages in Debian GNU/Linux 2.2 have been set up to run in the new environment, of course, and it will be possible to re-compile most programs on the new release without changes. However, there are always a few exceptions to the rule, so some of your local programs may need to be modified and/or recompiled on the new glibc to run properly.

When run under kernel 2.2 and glibc 2.1, system will automatically mount an additional `devpts' virtual drive, to support Unix98 PTYs, and some of our daemons (Unix servers) will automatically switch to using those new devices (/dev/pts/* instead of /dev/ttyp*).

With kernel 2.2.x, the PC printer devices start from lp0 instead of lp1 as with kernels 2.0.x, so you will want to update your printcap and other configuration files to use that (/dev/lp0 instead of /dev/lp1, /dev/lp1 instead of /dev/lp2 and so on).

The transition to using new kernel went quite smoothly, mainly because we almost completely prepared the 2.1 release for running a 2.2 kernel. Some issues still remain, mainly related to the network:

You should read the kernel's Documentation/Changes file for more information on upgrading software to run with the new kernel.

Upgrades to PAM enabled applications have been made as seamless and integrated as possible. For most instances, the new configurations will mimic that of your old pre-PAM configurations. However, not every case can be accounted for. If changes need to be made, you can install the libpam-doc package, which contains documentation on every aspect of the PAM library, even tips on modifying your existing non-PAM apps to support the new authentication model.

One major part of the PAM upgrade was merging secure-su into the main login package. The default su provided by shellutils is now provided by the login package so that PAM integration was more complete and system wide. If you used to use the default su, then you should not notice any changes with the new version. However, users of the obsolete secure-su package may have to check their configurations to ensure that the new PAM setup is compatible.

You may notice that this release includes two versions of Perl: 5.004 (in perl-5.004* packages) and 5.005 (in perl-5.005* packages). We highly recommend using the latter, newer version, and removing the old version, which is kept only for compatibility, as a convenience to programmers.[1] If you have/use any Perl modules from the new lib*-perl packages in your scripts, you will have to set the /usr/bin/perl symlink (using update-alternatives) to point to Perl 5.005, otherwise you will experience problems.

Please note that the Debian non-US archive has been slightly reorganized in order to support separation between free and non-free software. If you already used apt to access it, you will need to change your /etc/apt/sources.list lines for non-US to this form:

     deb http://non-US.debian.org/debian-non-US potato/non-US main contrib non-free

Previous versions of inetd (provided by the netbase package) had a bug in that when inetd was stopped, an existing connection to some of the internal services could stop inetd from restarting. This bug has been fixed in the current netbase, but older version of it are still vulnerable. If you find inetd isn't restarting properly, look for any existing inetd processes that are still running, or processes such as "-discard" or "-echo". If you have the psmisc package installed, running:

     sed 's/[[:space:]][[:space:]]*/ /g' /etc/inetd.conf |
                 grep '^ *[^#]' | cut -d" " -f1,3 |
                 while read serv type; do
                     fuser -n $type $serv;
                 done

as root will tell you which processes are using ports inetd is interested in.

Users of smail MTA will notice that release 2.2 doesn't ship that package anymore, due to serious bugs it had during our test cycles. Updated smail packages may still be found in the unstable distribution, or at http://www.fs.tum.de/~bunk/smail.html.

The new XFree86 and other xserver-* packages introduced in this release, compared to those in the previous release, 2.1, may very well contain better support for your graphics hardware, especially drivers for newer graphics cards such as many 3D accelerator cards. If you don't know exactly which X server package to choose, try the xviddetect program (from xviddetect package), that will output the name of the needed X server, based on information found about your PCI/AGP bus.

Users of the Intel i810 chipset should be aware that, to properly function, the X server requires a Linux kernel module that does not ship with the Linux kernel sources. The source code to this module, and instructions for compiling it and using it, may be found at the X Strike Force page.

If the X server you are using refers to the upgrading host for xfs font services, it will lose its connection to the font server when xfs is stopped. This is not fatal, but can be annoying. Note: similar things may happen for other daemons, so be prepared.


3.1.1 Renamed packages

The following packages have been renamed as shown. In most, if not all, cases, Conflicts:, Replaces:, and Provides: fields (or even dummy packages) have been provided so the new package will either get installed automatically, and/or will safely replace/remove the old one.

       ada-rm              ->    gnat-doc
          [2]
       alsa-modules        ->    alsa-base
       alsalib             ->    libasound0.4
       ax25-utils          ->    libax25
       blt8.0-unoff        ->    blt8.0
       c-client-dev        ->    libc-client4.7-dev
       console-tools-data  ->    console-tools
          [3]
       cti-ifhp            ->    ifhp
       cwnn                ->    freewnn-cserver
       cwnn-dev            ->    freewnn-cserver-dev
       data-dumper         ->    perl-5.005-doc
       dhcp-beta           ->    dhcp
       dhcp-client-beta    ->    dhcp-client
       dhcp-relay-beta     ->    dhcp-relay
       egcc                ->    gcc
       egcs-docs           ->    gcc-doc
       emacspeak-bs-tcl, emacspeak-dt, emacspeak-dt-tcl ->    emacspeak-ss
       eterm-backgrounds   ->    eterm
       fte-cfgdocs         ->    fte-docs
       fvwm                ->    fvwm1
       fvwm2               ->    fvwm
       gltt2               ->    libgltt2
       gltt2-dev           ->    libgltt2-dev
       gmp2                ->    libgmp2
       gmp2-dev            ->    libgmp2-dev
       gnome-gnobots       ->    gnome-gnobots2
       gnome-gnothello     ->    gnome-iagno
       gnome-gyahtzee      ->    gnome-gtali
       gsl                 ->    libgsl0
       gsl-dev             ->    libgsl0-dev
       gstep-base          ->    gstep-base0
       gstep-base-dev      ->    gstep-base0-dev
       gstep-extensions    ->    gstep-extensions0
       gstep-gui           ->    gstep-gui0
       gstep-gui-dev       ->    gstep-gui0-dev
       gstep-guile         ->    gstep-guile0
       gtkicq              ->    gnomeicu
       intlfonts-arabic    ->    xfonts-intl-arabic
       intlfonts-asian     ->    xfonts-intl-asian
       intlfonts-chinese   ->    xfonts-intl-chinese
       intlfonts-chinese-big ->    xfonts-intl-chinese-big
       intlfonts-european  ->    xfonts-intl-european
       intlfonts-japanese  ->    xfonts-intl-japanese
       intlfonts-japanese-big ->    xfonts-intl-japanese-big
       intlfonts-phonetic  ->    xfonts-intl-phonetic
       ivtools             ->    ivtools-unidraw
       kwnn                ->    freewnn-kserver
       kwnn-dev            ->    freewnn-kserver-dev
       lam                 ->    lam-runtime
       lesstifg-dbg        ->    lesstif-dbg
       lesstifg-dev        ->    lesstif-dev
       libapache-mod-auth-sys ->    apache-common
       libapache-mod-put   ->    apache-common
       libatalk1           ->    netatalk
       libatalk1-dev       ->    netatalk-dev
       libc6-doc           ->    glibc-doc
       libdatecalc-perl    ->    libdate-calc-perl
       libg++2.8.2-dev     ->    libg++2.8.1.3-dev
       libgg0              ->    libgii0
       libgg0-dev          ->    libgii0-dev
       libggi1             ->    libgii0, libggi2
       libgnome0           ->    libgnomesupport0
       libjpegg-dev        ->    libjpeg62-dev
       liblockdev0-perl    ->    liblockdev1-perl
       liblockdev0g-dbg    ->    liblockdev1-dbg
       liblockdev0g-dev    ->    liblockdev1-dev
       libmd5-perl         ->    libdigest-md5-perl
       libpam0g-util       ->    libpam-runtime
       libwcsmbs, wcsmbs-locale-ja ->    locale-ja
       libwine0.0.971116   ->    libwine
       libxml0             ->    libxml1
       maplay              ->    maplay3
       mysql-base          ->    mysql-gpl-client, mysql-client
       mysql-dev           ->    libmysqlclient6-dev
       newt0.25-dev        ->    libnewt-dev
       open                ->    console-tools
       palmpython          ->    pyrite
       perl                ->    perl5
       perl-base           ->    perl5-base
       popt                ->    libpopt0, libpopt-dev
       ppp-pam             ->    ppp
          [4]
       ptx                 ->    textutils
       python-bsddb, python-curses, python-misc, python-net ->    python-base
          [5]
       python-mysql        ->    python-mysqldb
       python-pil          ->    python-imaging
       r-pdl               ->    pdl
       sgmlspm             ->    libsgmls-perl
       smbfsx              ->    smbfs
       sorcerer            ->    pccts
       t1lib0-bin          ->    t1lib-bin
       t1lib0-dev          ->    t1lib-dev
       tcd                 ->    gnome-media
       timezones           ->    libc6
          [6]
       tm                  ->    wemi
       toshiba-fan, toshiba-hotkey ->    toshutils
       v-bin               ->    libv-bin
       v-dbg               ->    libv-dbg
       v-dev, vm-dev       ->    libv-dev
       v1g                 ->    libv1.22
       vnc-doc             ->    xvncviewer, vncserver
       wcsmbs-locale-ko    ->    locale-ko
       wnn                 ->    freewnn-jserver
       wnn-common          ->    freewnn-common
       wnn-dev             ->    freewnn-jserver-dev
       www-search          ->    libwww-search-perl
       wxxt1               ->    libwxxt1
       wxxt1-dev           ->    libwxxt-dev
       xfntbig5p-cmex24m   ->    xfonts-cmex-big5p
       xfntil2             ->    xfonts-biznet-iso-8859-2-{base,75dpi,100dpi}
       xntp3-doc           ->    ntp-doc
       xpm-bin             ->    xpm4g-dev
          [7]

Although we have made every effort to complete this list, it may still not be exhaustive.


3.1.2 Split packages

Between releases 2.1 (`slink') and 2.2 (`potato'), a number of packages have been split into two or more packages. The reason for these splits, in general, is that the original package provided a diverse set of functionalities, and that few, if any, users used all of these components. Some packages will display a notice warning of the split during the installation, some mention it in the package description, and some just ignore it.

If you find that a familiar package is lacking some or all of its functionality, check the list below to see if you need to install more packages to restore the original functionality. Failing that, check the changelog for the package, which can be found in /usr/doc/package/changelog.Debian.gz.

The following is a list of packages that have been split (this list may not be complete):

       gmc:
         mc
         gmc
         mc-common
          [8]
       libpgtcl:
         libpgtcl
         pgaccess
       mozilla:
         mozilla
         libnspr3
         libnspr3-dev
       netbase:
         netbase
         tcpd
         libwrap0
         libwrap0-dev
       netstd:
         bootp
         bootparamd
         bootpc
         finger
         fingerd
         fping
         ftp
         ftpd
         icmpinfo
         pidentd
         rdate
         rdist
         routed
         rsh-client
         rsh-server
         ruptime
         rusers
         rusersd
         rwall
         rwalld
         rwho
         rwhod
         tftp
         tftpd
         traceroute
         wdsetup
          [9]
       perl-base:
         perl-base
         perl-5.004-base
         perl-5.005-base
          [10]
       perl:
         perl-5.004
         perl-5.004-doc
         perl-5.005
         perl-5.005-doc
          [11]
       postgresql:
         postgresql
         postgresql-client
         postgresql-test
       vim:
         vim
         vim-gtk
          [12]


3.2 Necessary actions prior to the upgrade

Before upgrading your system, it is strongly recommended that you make a full backup, or at least, backup any data or configuration information you can't afford to lose. The upgrade tools and process are quite reliable, but a hardware failure in the middle of an upgrade could result in a severely damaged system.

The main things you'll want to save are the contents of /etc, /var/lib/dpkg and the output of dpkg --get-selections.

It's wise to inform all users in advance of any upgrades you're planning, although users accessing your system via ssh (at least) shouldn't notice much during the upgrade, and may want to continue working. If you wish to take extra precautions, back up or unmount user's partitions (/home) before upgrading.

Distribution upgrade should be done either locally from a textmode virtual console (or a directly connected serial terminal), or remotely via an ssh link.

You should not do the upgrade using telnet, rlogin, rsh, or from an X session managed by xdm on the machine you are upgrading. That is because each of those services may well be terminated during the upgrade, which can result in an inaccessible system that is only half-upgraded.

Regardless of the method used for upgrading, it is recommended that you check the status of all packages first, and verify that all packages are in an upgradable state. This can be done with

     dpkg -l | pager

or

     dpkg --get-selections > filename

(and then inspect filename), or it can be done in dselect.

Any package installation operation must be run with superuser privileges, so either login as root or use su or sudo to gain necessary access rights.

It is strongly recommended that you use /usr/bin/script program to record a transcript of the upgrade session. [13] Then if any problems develop, you can have a log of what happened, and if needed, provide exact information in a bug report. To start the recording, type:

     script -a /upgrade-2.2.typescript

or similar. Remember not to put the typescript file on a temporary directory (such as /tmp or /var/tmp).

It is desirable to remove any holds before upgrading. If any package that is essential for the upgrade is on hold, the upgrade will fail. If you changed and recompiled a package locally, and didn't rename it or put an epoch in the version, you must put it on hold to prevent it from being upgraded. The `hold' package state can be changed either by using dselect (in the Select menu, use the `H' and `G' keys to hold and unhold, respectively), or by doing:

     dpkg --get-selections > filename

editing filename to change "hold" to "install" (or vice versa), and then, with root permissions, doing

     dpkg --set-selections < filename

It might be a good idea to put ssh on `Hold' (if it's installed), since otherwise it will be replaced by OpenSSH (the new ssh package) which still has a slightly incompatible configuration file, that can sometimes cause sshd not to start after the upgrade. By putting it on hold you assure that your system will continue to be reachable; you can resolve things later, or select the ssh-nonfree package for installation, which is the completely compatible, but still non-free, version of ssh. (Note: even when upgrading without `Hold', existing connections will not be broken.)

Please note that the ssh package in this release disables root logins by default. If you rely on this feature for remote access to your system you should ensure that PermitRootLogin option in /etc/ssh/sshd_config is set to yes after upgrade (To ensure dpkg never updates the file to match new defaults, you can simply modify the file locally. Adding a blank line is enough.)

It is important that the /etc/rcS.d directory exists prior to the upgrade; the installation of the libc6 package will fail otherwise.

Don't forget to mount all needed partitions (notably the root and /usr partitions) read-write, with a command like:

     mount -o remount,rw /mountpoint

The /usr/share/doc directory (if it exists already) should not be a symlink (e.g. to /usr/doc), since that will cause some packages to break. However, symlinking /usr/doc to /usr/share/doc is allowed. Please note that if you use such a symlink there will be numerous messages about /usr/doc directories that can't be removed. Those are normal, and you can safely ignore them.

The recommended method of upgrading is by using apt-get directly, as described in the next section. APT is the next generation of Debian's packaging tools, and it enables smooth upgrades and easy installations.

You should not be doing any major package upgrades with default access methods in dselect, because those, unlike the apt method, do not do any logical package ordering during the installation, and therefore aren't as reliable. Additionally, such upgrades are far less tested and therefore unsupported by Debian.


3.3 Upgrade process

If you want to upgrade using CD-ROMs, or if you are upgrading from a Debian GNU/Linux release 2.0 or earlier, you need the versions of apt and dpkg available in the http://http.us.debian.org/debian/dists/potato/main/upgrade-m68k/ directory at your Debian mirror, or the upgrade/ directory on the first CD-ROM from your Debian 2.2 CD set. Download and install these files, using (in this exact order):

     dpkg -i dpkg_1.6.13_m68k.deb
     dpkg -i apt_0.3.19_m68k.deb

These are specially compiled static versions, that can be installed (and run) on any Debian system.

If you are upgrading from Debian GNU/Linux version 2.1 (any point release) and you want to upgrade using either the network (FTP, HTTP) or a local packages mirror (possibly a disk partition, or an NFS-mounted mirror), then you can use the apt and dpkg packages that came with that Debian release. Of course, if apt is not installed yet (it is not by default), install it now.

Please note that for upgrading with multiple CDs from any Debian release you need the static versions of apt and dpkg packages, as described above.

It is recommended that you read the apt-get(8) and the sources.list(5) man pages at this time. If you installed the static versions of apt and dpkg, you can only access the manpages with commands like man -l /usr/share/man/man8/apt-get.8.gz until the man-db package is upgraded.

Before starting the upgrade you must set up apt's configuration file for package lists, /etc/apt/sources.list.

apt will consider all packages that can be found via any "deb" line, and install the package with the highest version number, giving priority to the first mentioned lines (that way, in case of multiple mirror locations, you'd typically first name a local harddisk, then CD-ROMs, and then FTP/HTTP mirrors).


3.3.1 Setting up for an upgrade over the Internet

The default configuration is set up for installation from our main Internet servers, but you may wish to modify /etc/apt/sources.list to use other mirrors, preferably a mirror that is network-wise closest to you. In that case, first comment out the existing "deb" lines in sources.list, by placing a hash sign (#) in front of them.

Debian FTP or HTTP mirror addresses can be found at http://www.debian.org/distrib/ftplist (look at the "Full list of mirrors" section).

For example, your closest Debian mirror is ftp://alea.iacta.est/debian/ When inspecting that mirror with a web browser or FTP program, you will notice that the main directories are like this:

     ftp://alea.iacta.est/debian/dists/potato/main/binary-m68k/...
     ftp://alea.iacta.est/debian/dists/potato/contrib/binary-m68k/...

To use this mirror with apt, you add this line to your sources.list file:

     deb ftp://alea.iacta.est/debian potato main contrib

Note that the `dists' is added implicitly, and the arguments after the third are used to expand the path into multiple directories.

If the mirror also contains the non-US/* sections under ftp://alea.iacta.est/debian/debian-non-US, also add the following line:

     deb ftp://alea.iacta.est/debian/debian-non-US potato/non-US main contrib

Any package needed for installation that is fetched from the network is stored in the /var/cache/apt (and the partial/ subdirectory, during download), so you must make sure you have enough space before attempting to start the installation. With a reasonably extended Debian installation, you can expect at least 300 MB of downloaded data.

Note: if you are using the static versions of apt and dpkg, the hostname-lookup is broken (which is one reason to use slink's apt when upgrading over the network). The solution is to simply put the mirrors' IP address in the "deb" line. (Hint: nslookup some-server)


3.3.2 Setting up for an upgrade from a local mirror

Instead of using FTP or HTTP packages mirrors, you may wish to modify /etc/apt/sources.list to use a mirror on a local disk (possibly NFS-mounted). In that case, first comment out the existing "deb" lines in sources.list, by placing a hash sign (#) in front of them.

For example, your packages mirror may be under /var/ftp/debian/, and have main directories like this:

     /var/ftp/debian/dists/potato/main/binary-m68k/...
     /var/ftp/debian/dists/potato/contrib/binary-m68k/...

To use this with apt, you add this line to your sources.list file:

     deb file:/var/ftp/debian potato main contrib

Note that the `dists' is added implicitly, and the arguments after the third are used to expand the path into multiple directories.

If your local mirror contains the non-US/* sections under /var/ftp/debian-non-US, also add the following line:

     deb file:/var/ftp/debian-non-US potato/non-US main contrib


3.3.3 Setting up for an upgrade from CD-ROMs

First you need to install the latest version of apt and dpkg packages, as described above.

If you want to use CDs only, comment out the existing "deb" lines in /etc/apt/sources.list by placing a hash sign (#) in front of them.

Make sure there is a line in /etc/fstab that enables mounting your CD-ROM drive at the /cdrom mount point (the exact /cdrom mount point is required for apt-cdrom). For example, if /dev/hdc is your CD-ROM drive, /etc/fstab should contain a line like:

     /dev/hdc      /cdrom     auto    defaults,noauto,ro     0   0

Note that there may be no spaces between the words defaults,noauto,ro in the fourth field.

To verify it works, insert a CD and try running

     mount /cdrom       (this will mount the CD to the mount point)
     ls -alF /cdrom     (this should show the CD's root directory)
     umount /cdrom      (this will unmount the CD)

Next, run:

     apt-cdrom add

for each Debian Binary CD-ROM you have, to add the data about each CD to APT's database.


3.3.4 Upgrading

Once you have configured apt's sources.list, run (as root):

     apt-get update

This will resynchronize the package overview files from their sources, updating information about new and updated packages.

Some people prefer to run

     apt-get --fix-broken --show-upgraded --simulate dist-upgrade | pager

in order to see what will happen. While this may be somewhat time consuming, it may avoid some surprises. This will tell you either what's wrong with your system (and how to solve it), or, most likely, what exactly will be done during the upgrade. Pay special attention to the packages that will be "REMOVEd"; no essential packages should be listed there.

After you have verified that apt-get should work fine, run:

     apt-get --fix-broken --show-upgraded dist-upgrade

This will perform a complete upgrade of the system, i.e. install the newest available versions of all packages, and resolve all possible dependency changes between packages in different releases. If necessary, it will install some new packages (usually new library versions, or renamed packages), and remove any conflicting obsoleted packages.

When upgrading from a set of CD-ROMs, you will be asked to insert specific CDs at several points during the upgrade. You might have to insert the same CD multiple times; this is due to inter-related packages that have been spread out over the CDs.

New versions of currently installed packages that cannot be upgraded without changing the install status of another package will be left at their current version (displayed as "held back"). Therefore, it may be necessary to use dpkg or dselect to remove and reinstall some broken packages or dependencies. Alternatively, apt-get dselect-upgrade may be used after apt-get -f dist-upgrade. (See the apt-get(8) man page.)

The --fix-broken (or just -f) option causes apt to attempt to correct a system with broken dependencies in place. apt does not allow broken package dependencies to exist on a system.


3.3.5 Possible issues during or after upgrade

Sometimes it's necessary to enable APT::Force-LoopBreak option in APT to be able to temporarily remove an essential package due to a Conflicts/Pre-Depends loop. apt-get will alert you of this and abort the upgrade. You can work around that by specifying -o APT::Force-LoopBreak=1 option on apt-get command line.

It is possible that a system's dependency structure can be so corrupt as to require manual intervention. Usually this means using dselect or

     dpkg --remove packagename

to eliminate some of the offending packages, or

     apt-get --fix-broken --show-upgraded install
     dpkg --configure --pending

In extreme cases you might have to force re-installation with a command like

     dpkg --install /path/to/packagename.deb

After these things, you should be able to resume the upgrade using the previously described dist-upgrade commands.

During the upgrade, you will be asked questions to configure or re-configure several packages. When/if you are asked if any file in the /etc/init.d or /etc/terminfo directories, or the /etc/manpath.config file should be replaced by the package maintainer's version, it's usually necessary to answer `yes' to ensure system consistency. You can always revert to the old versions, since they will be saved with a .dpkg-old extension.

If you're not sure what to do, write down the name of the package or file, and sort things out on a later time. You can search in the typescript to re-view the information that was on the screen during the upgrade.

When apt-get dist-upgrade is done, the "formal" upgrade is finished, but there are some other things that should be taken care of before the next reboot.

Most importantly, packages locales and util-linux may need to be installed. This can be done with:

     apt-get install locales util-linux

If you were upgrading from Debian version 2.0 or earlier, this will remove the getty package, because getty is now in the util-linux package.

There probably are several more packages that need to be installed, that are not noticed by apt-get, because apt-get doesn't automatically select the packages that aren't depended on by other packages (e.g. all packages in Recommends: and Suggests: fields). These can quite easily be found when using dselect or another visual frontend. In dselect, pick the `apt' method in the [A]ccess screen (if you haven't already) and update the database with new packages information, using the [U]pdate option. After that, in the [S]elect screen, press `o', `o', `v' and Shift-d, and then search for the

     --- Obsolete and local packages present on system ---

header. In that section, all such packages will be shown. For example, the old gimp-smotif and gimp-dmotif packages were replaced by gimp in Debian GNU/Linux 2.1. You can either install the new package via dselect (which will then show a "dependency conflict resolution" screen indicating that the old packages should be removed), or by using:

     apt-get install gimp

which will remove the older versions at once (you might just need to confirm).

Another example, that is often not shown even in dselect, are the telnet and talk clients and servers, and the NFS server, which were split off from the old netstd package. You can install them with a command like:

     apt-get install telnet telnetd talk talkd nfs-server

The same applies to manpages-dev, which was split off from manpages.

Please refer to the Release Notes document for Debian GNU/Linux 2.1 for more information about those packages that were split in that release; go back and read Renamed packages, Section 3.1.1 and Split packages, Section 3.1.2 to see the list of packages split in this release.

If you were upgrading from Debian version 2.0 or earlier, AND have the X Window System installed, give the following commands:

     apt-get remove xbase
     apt-get install xfonts-base xfonts-75dpi xfonts-100dpi xfonts-scalable

And if you don't want xdm to start at boot time ("X autostart"), also run:

     apt-get remove xdm

You can read /usr/doc/xfree86-common/README.Debian-upgrade for more info, but you probably don't have to do anything else.

The configuration system for the kernel modules has changed since Debian GNU/Linux release 2.0. If you upgraded from Debian 2.0 or earlier, you must convert your system before the next reboot. Usually running update-modules force will be enough; nevertheless reading the update-modules(8) manual page is recommended.

Note that the Linux kernel was not upgraded by these procedures. You may wish to do so yourself, either by installing one of the kernel-image-* packages or by compiling a customized kernel from sources.

Enjoy your new Debian GNU/Linux 2.2 system! :-)


[ previous ] [ Contents ]
Release Notes for Debian GNU/Linux 2.2 (`potato'), Motorola 680x0
$Id: release-notes.sgml,v 1.48 2000/08/12 03:56:12 aph Exp $
Josip Rodin, Bob Hilliard, Adam Di Carlo, Anne Bezemer
debian-doc@lists.debian.org